Central Air Conditioner Installation in Panama City Beach, FL 32413

For the fantastic bulk of houses, central air installation is stuffed and too complicated with danger to attempt without skilled assistance. This is owing to the proficiency required, the administrative wrangling of consents and licensing requirements, and the risk of voiding service warranties if the elements are set up incorrectly.

What do Central Air Conditioners do?

A main air conditioner cools air in one area prior to dispersing it throughout the home utilizing the furnace’s air handling abilities. This sets it apart from window or wall air conditioning system or mini-split systems, which all chill reasonably tiny locations and require lots of systems to cool the whole house.

Most single-family houses in the United States with central air use a split system. This indicates that the gadget is divided into two parts: an evaporator coil within your house and a compressor outside.

Central Air Conditioner Installation in Panama City Beach, FL 32413

Working With Professional Central Air Conditioner Installers in Panama City Beach, FL

When talking with contractors, ask about their method to the task. Likewise, focus on the concerns they ask! An installer must ask clarifying questions so that your choices and decisions are represented in their estimate and completion outcome.

Planning for Central Air Installation in in Panama City Beach

Installing main air conditioning is a large endeavor that needs considerable preparation ahead of time. Request that your professional check their treatment and verify that they will handle any required permits or other important documents.

Discuss with your contractor how much you value energy performance above initial expenditure. This is likewise an excellent moment to talk about the position of the condenser unit and the kind of thermostat you pick.

Sizing for your Central Air Conditioner

Your specialist will assist you in identifying the suitable size central air conditioner for your house. A system that is too little will run practically continually, whereas a unit that is too large will chill the house too quickly and shut down prior to finishing a complete cycle.

The fast on/off in the latter circumstance is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil prevents air from flowing. As a outcome, a huge air conditioner might be less efficient at cooling than a smaller system.

Your Air Conditioner installation will do a estimation called a “Manual-J” to determine finest unit for your house. This will take into account all of the specifications we’ve mentioned and more, resulting in the most accurate size possible.

We comprehend that many house owners like to have a general notion of what size they require ahead of time. Here’s a rough evaluation of main air conditioner size: To get the Btu needed, increase the square footage of your house’s conditioned area by 25, then divide by 12,000 to acquire the tonnage.

Keep in mind that this is merely a standard quote, and there are numerous factors. If your home’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Panama City Beach, FL 32413

When you’ve gone over the basic plan and discussed design possibilities, the specialist needs to provide you an estimate. As always, obtain written quotes from numerous providers. The only exception would be if you’re setting up air conditioning in a new home, because the builder will more than likely manage it.

When working with a contractor or independent HVAC contractor, do not be reluctant to seek clarifying information or request expenditure breakdowns. Even if the professional is not able to information whatever, they need to be all set to communicate sufficiently to assist you feel more at ease with the procedure.

Central Air Conditioner Installation in Panama City Beach, FL 32413

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices vary based on the local market and the job information, just like any substantial task. For labor and supplies, a typical split system central air conditioning installation utilizing an existing heating system could cost in between $3,000 and $7,000 or more. Typically, that expense will be divided around 60/40, with labor accounting for most of it.

However, keep in mind that you will probably be paying full retail instead of receiving a business discount, so the entire cost of the project might not be more affordable than the specialist’s estimate. You’ll also need to perform your own sizing, and you’ll be held responsible if there are any issues with the devices.

If you’re replacing an existing main air conditioning system, expect an extra price to get rid of and remove of the old system and refrigerant. When constructing a furnace and air conditioning system, the cost of each component is regularly reduced, while the total expense of the work is greater.

Central AC Installation in Panama City Beach, FL 32413

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Read More

We can provide Central Air Conditioning Installation for all areas in Panama City Beach including: Bay County, Grande Pointe, Inlet Beach, P C Beach, Panama City, Rosemary Bch, Seacrest, Watersound, W Panama City Beach, West Panama City Beach and in Area Codes 850

Call 888-495-1502 Now!

Call Now ButtonClick to Call