Central Air Conditioner Installation in Jacksonville, FL 32219

For the fantastic majority of homes, central air installation is stuffed and too complex with danger to try without expert support. This is owing to the know-how needed, the administrative wrangling of permissions and licensing requirements, and the danger of voiding warranties if the components are set up incorrectly.

What do Central Air Conditioners do?

A main air conditioner cools air in one spot before distributing it throughout the home using the heating system’s air handling abilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill reasonably small areas and need many units to cool the entire house.

Many single-family houses in the United States with central air conditioning use a split system. This suggests that the gadget is divided into 2 parts: an evaporator coil within your house and a compressor exterior.

Working With Professional Central Air Conditioner Installers in Jacksonville, FL

When talking with specialists, inquire about their method to the job. Likewise, take note of the concerns they ask! An installer should ask clarifying questions so that your choices and preferences are represented in their quote and completion outcome.

Planning for Central Air Installation in in Jacksonville

Installing central air is a big endeavor that requires substantial preparation ahead of time. Request that your specialist check their treatment and verify that they will manage any required licenses or other important documents.

Talk about with your professional just how much you value energy performance above preliminary expense. This is likewise an exceptional moment to discuss the position of the condenser unit and the type of thermostat you pick.

Sizing for your Central Air Conditioner

Your contractor will assist you in determining the suitable size central air conditioning conditioner for your house. A unit that is too little will run almost continuously, whereas a system that is too big will chill the house too quickly and shut off prior to completing a full cycle.

The fast on/off in the latter circumstance is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil avoids air from flowing. As a result, a huge a/c may be less effective at cooling than a smaller unit.

Your Air Conditioner installation will do a estimation known as a “Manual-J” to determine the very best unit for your house. This will take into account all of the parameters we’ve mentioned and more, resulting in the most precise size possible.

We understand that many property owners like to have a general notion of what size they need ahead of time. Here’s a rough estimation of main air conditioner size: To get the Btu required, multiply the square video of your house’s conditioned area by 25, then divide by 12,000 to get the tonnage.

Keep in mind that this is merely a fundamental quote, and there are numerous factors. If your home’s first flooring has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Jacksonville, FL 32219

professional ought to offer you an price quote as soon as you’ve gone over the fundamental plan and gone over design possibilities. As constantly, obtain composed estimates from various service providers. The only exception would be if you’re installing a/c in a new home, because the home builder will probably handle it.

When working with a contractor or independent HVAC specialist, don’t be hesitant to look for clarifying details or demand expenditure breakdowns. Even if the contractor is unable to detail everything, they need to be all set to communicate sufficiently to help you feel more at ease with the treatment.

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

• Duct work installation or modification
  • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
  • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
  • Duct work should be done before drywall is put in new construction.

• Interior unit
  • The evaporator coil is installed within the furnace plenum.
    • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
    • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”

• Exterior unit
  • Several considerations influence the positioning of the outside unit, including:
    • The distance between the inside unit and the electrical service panel;
    • The levelness of the ground;
    • The proximity of the loud external unit to windows or doors;
    • Distances needed by code from gas or water meters (refer to your local building department for specifics).

• Connect the line set
  • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
  • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
    • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
    • To avoid water infiltration, the penetration to the external should be sealed.

• Connect the Electrical Supply
  • An outside cutoff will be required for the condenser unit.
  • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
  • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
  • • If the project was planned properly, any work on the panel should already be included in the project estimate.
  • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.

• Condensate Drain Line
  • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
  • Units located in a basement typically run to a floor drain.
  • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.

• Thermostat
  • When installing central air conditioning in a new home, you must select a thermostat.
  • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
  • This is one phase in the process that is ideal for a little do-it-yourself effort.
    • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs differ based on the local market and the job information, as with any considerable job. For labor and supplies, a common split system central air conditioning installation utilizing an existing furnace could cost between $3,000 and $7,000 or more. Usually, that cost will be split around 60/40, with labor accounting for majority of it.

Bear in mind that you will most likely be paying complete retail rather than getting a commercial discount, so the entire cost of the task might not be cheaper than the professional’s estimate. You’ll also have to perform your own sizing, and you’ll be held liable if there are any issues with the devices.

dispose and remove of the old system and refrigerant if you’re replacing an existing central air conditioning system. When constructing a furnace and cooling system, the cost of each element is regularly decreased, while the total expense of the work is higher.

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Call 888-495-1502 Now!

We can provide Central Air Conditioning Installation for all areas in Jacksonville including: Duval County, Dinsmore, Jax and in Area Codes 904

Call 888-495-1502 Now!