Central Air Conditioner Installation in Jacksonville, FL 32208

For the fantastic bulk of homes, central air conditioning installation is stuffed and too complicated with risk to try without expert support. This is owing to the competence required, the governmental wrangling of consents and licensing requirements, and the threat of voiding warranties if the parts are installed incorrectly.

What do Central Air Conditioners do?

A central air conditioner cools air in one area before distributing it throughout the residence utilizing the heater’s air handling abilities. This sets it apart from window or wall ac system or mini-split systems, which all chill fairly tiny areas and require many systems to cool the whole home.

A lot of single-family homes in the United States with central air utilize a split system. This suggests that the gadget is divided into 2 parts: an evaporator coil within home and a compressor exterior.

Working With Professional Central Air Conditioner Installers in Jacksonville, FL

When talking with contractors, ask about their approach to the task. Also, take note of the concerns they ask! An installer ought to ask clarifying questions so that your preferences and decisions are represented in their estimate and the end result.

Planning for Central Air Installation in in Jacksonville

Setting up central air is a large endeavor that needs considerable preparation ahead of time. Request that your professional check their treatment and verify that they will manage any needed permits or other crucial documentation.

Go over with your professional just how much you value energy efficiency above preliminary expenditure. This is also an exceptional minute to discuss the position of the condenser system and the type of thermostat you select.

Sizing for your Central Air Conditioner

Your specialist will help you in determining the suitable size central air conditioner for your home. A system that is too small will run virtually continuously, whereas a system that is too big will chill the home too rapidly and shut down prior to completing a complete cycle.

The quick on/off in the latter scenario is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil prevents air from streaming. As a outcome, a big air conditioner may be less efficient at cooling than a smaller sized unit.

Your Air Conditioner installation will do a estimation understood as a “Manual-J” to identify the very best system for your home. This will take into account all of the criteria we’ve pointed out and more, leading to the most exact size possible.

We understand that numerous homeowners like to have a general notion of what size they need ahead of time. central air conditioner size: To get the Btu required, increase the square video footage of your house’s conditioned area by 25, then divide by 12,000 to obtain the tonnage.

Keep in mind that this is simply a standard price quote, and there are a number of factors. If your house’s first flooring has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Jacksonville, FL 32208

contractor should offer you an estimate as soon as you’ve discussed the basic plan and talked about design possibilities. As always, get composed price quotes from different suppliers. The only exception would be if you’re setting up cooling in a new home, since the contractor will more than likely handle it.

When working with a home builder or independent HVAC specialist, do not be reluctant to look for clarifying information or demand cost breakdowns. Even if the specialist is not able to detail everything, they need to be prepared to communicate sufficiently to help you feel more at ease with the treatment.

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

• Duct work installation or modification
  • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
  • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
  • Duct work should be done before drywall is put in new construction.

• Interior unit
  • The evaporator coil is installed within the furnace plenum.
    • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
    • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”

• Exterior unit
  • Several considerations influence the positioning of the outside unit, including:
    • The distance between the inside unit and the electrical service panel;
    • The levelness of the ground;
    • The proximity of the loud external unit to windows or doors;
    • Distances needed by code from gas or water meters (refer to your local building department for specifics).

• Connect the line set
  • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
  • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
    • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
    • To avoid water infiltration, the penetration to the external should be sealed.

• Connect the Electrical Supply
  • An outside cutoff will be required for the condenser unit.
  • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
  • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
  • • If the project was planned properly, any work on the panel should already be included in the project estimate.
  • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.

• Condensate Drain Line
  • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
  • Units located in a basement typically run to a floor drain.
  • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.

• Thermostat
  • When installing central air conditioning in a new home, you must select a thermostat.
  • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
  • This is one phase in the process that is ideal for a little do-it-yourself effort.
    • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs differ based on the regional market and the task information, similar to any considerable project. For labor and materials, a typical split system central air installation utilizing an existing heater could cost between $3,000 and $7,000 or more. Typically, that expense will be split around 60/40, with labor accounting for most of it.

Bear in mind that you will most likely be paying full retail rather than receiving a commercial discount rate, so the entire expense of the task might not be less expensive than the professional’s estimate. You’ll also have to perform your own sizing, and you’ll be held responsible if there are any problems with the devices.

get rid of and dispose of the old system and refrigerant if you’re changing an existing central air system. When building a furnace and cooling system, the expense of each part is often lowered, while the total cost of the work is higher.

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Call 888-495-1502 Now!

We can provide Central Air Conditioning Installation for all areas in Jacksonville including: Duval County, , Jax and in Area Codes 904

Call 888-495-1502 Now!